Southbend SE36T-TTB 36" Heavy Duty Electric Range W/ Round Hot Plates & Griddle

Description

Please Contact Us With Any Questions/Concerns
* Picture is for reference only and may contain options or accessories that are not included. Please contact us to make sure all features you need are included!
*If you require Liftgate Delivery, please add for this service. There is a fee for Non-commercial Delivery as well.*
Welcome To Our Listing!
Southbend, SE36T-TTB, 36" Heavy Duty Electric Range
Features and Benefits:
The Southbend SE36T-TTB features a construction where the frame of the range and oven is welded aluminized steel with stainless steel front, sides and top. Grease troughs are located at front and rear for drainage, with grease chutes into two wide, drawertype receptacles. The griddle models are furnished with splash guards surrounding back and side of the griddle section. Range is 100% front serviceable. Wiring is connected at a terminal compartment in the base. Knockouts are provided in the bottom and back for power supply entrance. See electrical data for kW rating of range tops, ovens and TruVection oven base.
Heating is accomplished with formed tubular elements clamped underneath each griddle and rectangular hotplate. The TTT has 4 heating sections for the 36” x 24” griddle. The TTB and the TTH have two heating sections under the 24” x 24” griddle. The oven heating element is located on the side of the cavity encircling the oven blower fan. Oven will preheat to 450oF in 20 minutes.  Range-top section controls are mounted in a central ventilated control panel, hinged for easy service access. 9” solid round hotplates are controlled by an indicating 3-heat switch. The 12” x 24” hotplate sections on the HHH, HHB  and TTH are controlled by a thermostat with a temperature range of 250oF to 850oF. The griddle sections on the TTT, TTB and TTH are controlled by a thermostat with a temperature range of 150oF to 450oF. Range is provided with a 2 hour timer adjustable from 6 to 120 minutes (timer has a bell signal). The oven temperature is controlled by a thermostat adjustable from 150oF to 450oF. Each thermostat is provided with an “OFF” position. Each 9” diameter hotplate is provided with a 4-position, 3-heat switch “HIGH”/”MEDIUM”/”LOW” and “OFF” settings. An indicator light is associated with each thermostat, indicating when preset temperature is reached and cycles on or off. Oven section includes a “HIGH”/”LOW” fan speed switch.
TruVection Oven Features:
7.5KW, deck oven is provided with coved porcelain enamel finish, dependent doors with windows (Full180°opening), oven interior light, 1/2 hp two-speed fan motor, electronic ignition, cool down fan mode, oven “ready” light, and standard controls (150°F to 500°F solid state thermostat and 60 minute mechanical cook timer). Oven heating is regulated by an adjustable thermostat control. Blower fan circulates air within the cavity “scrubbing” heat to the oven interior for even heat distribution within the cavity.
Item Details
Configuration:  Heavy Duty Range, Electric, 36", (2) Round Hot Plates, (1) 24" Griddle, Thermostatic Controls, (1) TruVection Oven
Height:  40.4"
Width:  36"
Depth:  38.5"
Warranty:  1 Year Limited Warranty
Please Contact Us for a copy of the Manufacturer's Spec Sheet or Warranty Info!
FREE SHIPPING to business addresses in contiguous U.S.!
Free Shipping DOES NOT include Lift Gate OR Non-Commercial Delivery Charges.
** Most warranties are not valid if used at a non-commercial address **
California Residents Only
WARNING: This product may contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov
Contact Us for details!
(See below for full details)
*** Ebay pricing IS NOT available in our store locations!
Payments:
Payment must be made within 5 days of the auction ending, or the item will be relisted.
We accept VISA, MasterCard, American Express, Discover and Paypal.
Shipping Info:
Shipping Method:
Freight
Fast Shipping:
Most orders will ship within 2-3 business days after payment has cleared.
Shipping to the contiguous 48 states only.
Sorry, No APO/FPO or PO Box Delivery
If you require Liftgate Delivery, please add for this service.
There is a fee for Non-commercial Delivery as well.
If you would like the freight company to
call you before delivery, please add an additional
Save Money!!
Buy multiple auctions and we will combine your shipping, which saves a great deal of money!
Smaller items that are able to ship UPS Ground are not applicable to Lift Gate or Residential Delivery Fees
It is your responsibility to inspect all shipments for damage BEFORE YOU SIGN for the shipment. If the item is damaged, you need to alert the shipping company immediately, and DO NOT SIGN for the item
.
THE BEST RULE OF THUMB WITH FREIGHT DAMAGE IS:
"IF IN DOUBT, REFUSE THE SHIPMENT!"
What is freight delivery?
Freight delivery is required when merchandise is too large or heavy to be delivered by UPS or USPS. These items are delivered to your locations via a tractor trailer. Standard Delivery does not include unloading the merchandise or delivering it inside of your location. You are responsible for offloading the merchandise and bringing your merchandise inside of your location. Please contact us if you require special handling.
What is a lift-gate?
A lift-gate is a device used to raise and lower items from ground level to the level of a tractor trailer. Freight companies deliver items on a tractor trailer which is 56 inches above the ground. These trailers are designed to load and unload at a loading dock or with a fork-lift. If your delivery location does not have a loading dock or fork-lift and the item is too heavy to remove from the trailer by hand, then you may need a lift-gate.
Do I need lift-gate delivery?
There are several ways to avoid paying lift-gate delivery costs. If your delivery location has a loading dock or forklift you do not need a lift-gate. If the individual items in your shipment are light enough for you and your friends to remove from the truck you do not need a lift-gate. If you are willing to drive to the closest terminal and take terminal delivery you do not need a lift-gate. Terminal delivery is often a good way to save both lift-gate and residential delivery fees. If none of these options work for you then you will need lift-gate delivery.
How much does lift-gate delivery cost?
The average cost of a lift-gate is . Douglas Equipment ships with several different freight companies depending on the delivery location and the delivery services you request. The best way to find your actual lift-gate cost is to call us for an exact quote of your delivery costs with and without lift-gate delivery
What is Residential Delivery?
Residential delivery is a term and fee used by freight carriers to describe delivery to any address which is not zoned commercial. Usually this is a home, but it could be a church, farm community center, etc. Businesses run from a home are still considered residential. The average residential delivery fee is .
Do I need Residential Delivery?
Often you can avoid residential delivery fees by receiving your shipment at a nearby business or office building. If you have a pickup truck capable of hauling your item, we can schedule "terminal delivery" where the item is delivered to the closest trucking terminal and you receive the item there. This is a good way of saving both residential and lift-gate delivery fees.
What is terminal delivery?
Terminal delivery is where the freight company delivers your shipment to their closest freight terminal (usually in the closest urban area) and you receive the shipment at their terminal.
Why would I use terminal delivery?
By accepting your shipment at the terminal you can save residential and lift-gate delivery fees. You can also save high local delivery fees if you live in a remote or hard to reach area.
How does insurance work with freight shipments?
Every freight shipment is insured. But in order to collect the insurance on damaged goods the receiver MUST INSPECT THE SHIPMENT BEFORE SIGNING FOR IT! Legally, when Douglas Equipment signs the shipment over to the freight company, the freight company owns it. When you receive the item and sign for it, you own it. Therefore it is imperative that you carefully inspect your shipment for any damage.
If there is any damage at all you must note the damage on the freight bill. This is the only way you will be compensated for the damage!!
What should I look for when inspecting my shipment ??
A very small amount of freight shipments arrive damaged, but be sure to inspect your item when it arrives. The most common cause of damage is the fork-lift so pay special attention to holes poked in the packaging and to the bottom 18" of the shipment. Inspect the outside of the packaging to look for dents or crushed corners. If you see anything even slightly suspicious carefully remove all packaging and inspect the item. The driver may be impatient but that beats having to settle for a damaged item. Unlike FedEx or UPS, if you sign your Freight bill free of any claims then you have little recourse if you later discover that it is damaged.
What if my item is damaged?
You have two options. You can note damage on the freight bill and accept the item anyway, or you can refuse the shipment. 99% of freight damage is cosmetic. If you sign the freight bill damaged then the freight company will replace your item, approve reimbursement for parts and repair, or provide compensation depending on the damage to your item. This is often the best option if you need to get your item operational and the damage is cosmetic. If you refuse the shipment it will be returned to us and we will ship a replacement as soon as possible.** This may take some time due to stocking issues and transit times, but this is usually the best option if your shipment is damaged beyond repair. If you accept your shipment in a damaged state it is very important that you call the freight company immediately to schedule an inspection and file the freight claim, you should take good pictures from different angles of the item and the packaging, and you should save all packaging material.
**
If the item is used, there will be no replacement available, so it is vitally important to have the freight company compensate you for repair.
Return Policy:
Returns are at the discretion of Douglas Equipment. If accepted, prior authorization must be obtained to return any equipment. Authorized returns for credit must be prepaid and be received by Douglas Equipment within 10 working days of purchase. Credit will be based on invoice price, less 25% restocking charge, and return freight charges. Refurbishing, if necessary, will be an additional charge to purchaser and will be deducted from any authorized credit.
If free shipping was offered, original and return shipping charges will be deducted from refund amount.
If you order a "Special Order" or "Custom" item, the restocking fee would apply as soon as the order has been placed with the factory.
Taxes:
Due to changing tax requirements, we are required to collect tax in many different states (please contact us to see if your state is taxable). For applicable states any taxes imposed by state governmental authorities on the sale, or use of goods referred to in this auction shall be paid by the buyer, in addition to the purchase price. If items are tax exempt for reasons of: resale, sales of Non-taxable services, Sales to Agricultural Producers, Governmental Entities, or Sales to Persons Presenting a Direct Pay Permit, a signed tax exemption must be filed.
© DEQ Online, 2014