BKI Pressure Fryer FKM-F With Henny Penny HC-903 CDT Heated Holding Cabinet😍

Description

BKI Pressure Fryer FKM-F
With
Henny Penny HC-903 CDT
This sale is for both units together / ship on one skid
Be sure to scroll down to read information on both pieces of equipment
The pictures shown are of the actual equipment offered.
See my other listing for other BKI Fryers to choose from
Typical scratches and such that show light use...Have been pressure washed and cleaned ...not a greasy mess.
Seems like there is a lot of these listed on eBay with varying model numbers and levels of condition… It comes to you in a clean condition not a greasy mess… The equipment is reasonably priced compared to others listed here on eBay.   Better savings on your reasonable offers, I’ll pack and ship on a pallet.  Thanks for your considerations.
Pressure Fryer
Model No: FKM-F
MFG date: 6/26/17
Serial No:
191100R-706030
Product Code: 191100P
Voltage: 208/3PH/47.3Amp/17KW
Designed for simple, safe, economical operation, BKI’s electric pressure fryers enhance fried food operations and increase food quality. Controlled low pressure-cooking delivers moist, tender fried food with a 30% longer holding capability.
Patented “Quick-Connect” filtration system improves operations through a fail-safe alignment feature, while the built-in cold zone collects breading “fall-off” to extend shortening life for a substantial savings. Highest quality construction stands up to heavy use.
Standard Features:
BKI Industries Electric Pressure Fryer, Model FKM-F
This unit is in very good working condition:
* Stainless steel construction
* 75 pound oil capacity
* Cooks up to 18 pounds of product
* Utilizes controlled low pressure
* Pressure regulated lid interlock system
* Built-in "quick-connect" filtration system
* Microprocessor controlled for enhanced cooking capabilities
* Digital controls
* NSF
* Mounted on casters
* 208 volt, 3-phase, 48 amp, 17 Kw
* Exterior Dimensions - 49 1/4" high x 24 1/2" wide x 38 1/2" deep
* Fryer Basket Dimensions - 8" high x 15 1/2" diameter
* Shipping weight - 425 lbs.
Henny Penny HC-903 CDT
Henny Penny HC-903 CDT
Product NO: HHC903.09
Serial NO: DA1810141
Volts: 208 1PH.
Amps: 706 / Watts: 1586
Height 32.92 in (836 mm)
Low profile base for under counter
Width 24.75 in (628 mm) 24.75 in (628 mm)
Depth 31.75 in (806 mm) 31.75 in (806 mm)
Unit incorporates:
• 5 countdown timer control or electromechanical controls
• Shelf runners for 5 full-size sheet pans on 3.75 in (95 mm) centers
• 300 grade stainless steel construction throughout
• Full cabinet circulation with dual heavy-duty blower motors and
ventilated side racks
• Perimeter door gasket, fully insulated sidewalls and control module
• 4
heavy-duty casters, 2 locking
Henny Penny heated holding cabinets keep hot foods safe and appetizing prior to serving.
The 900 series holding cabinets were developed to hold large quantities of pressure-fried chicken for long periods of time without sacrificing freshness or presentation.
The key is even heating and constant circulation. Dual fans and ventilated side racks allow hot, moist air to circulate evenly throughout the cabinet. This helps keep practically any menu item hot and tasty until serving and translates into higher food quality with less waste throughout the day. Henny Penny holding cabinets also improve equipment and labor utilization. With proper holding capability, foodservice operators can cook in quantity before peak periods and stock service cases directly from the holding cabinet. The HHC 903 is a half-size mobile heated holding cabinet designed to provide excellent holding for lower volume and cost. It can be stacked as the HHC 902 to double your holding capacity in the same footprint and provide the versatility of two entirely separate holding environments and control sets. Fully insulated cabinet and tightsealing door help you enjoy the benefits of high quality holding while using very little energy. Many operators see a net reduction in overall kitchen energy costs. Partial pan removal, self-closing door and magnetic closures contribute to convenient work flow and energy savings. Time 5 shelves separately with available Countdown Timer (CDT) control.
NO Packaging or Skidding Fees!
High bidder pays actual - only freight cost.
You pay ONLY what it takes to get it to your place, not a penny more!
Skidded weight and size is:
570 Lbs
49 X 40 X 57 inches tall
Freight Class 85
**NOTE**
for an accurate cost of freight charges please contact me and provide the answers to the following questions...
Zip Code?
Business or Residential Delivery?
Do you have a Dock or Forklift for unloading?
**NOTE**
you are welcome to contract your own transportation using the above Dimensional Specifications and Freight Class Code.  I will skid pack and load on to any truck for you at no additional charge.