4 SWEDISH WRAP DIES @ 7° FOR COIN RING TOOLS PLUS 9 PUSH RODS

Description

This is a coin ring die set of 4 dies and 9 push rods. These dies are made to do the Swedish Wrap Method. The inside angle is 7 degrees which is much less than that of the fold over reduction dies. Also with 4 different sized dies instead of just 2 or 3, you have more sizes to work with if you do push the coin all the way thru the die. That makes it easier to get the size ring you need.  You will still need a fold over die to start the process of making a ring.
The larger die in this set is approximately 1.4" at the top and 1.15" at the bottom.
Next is 1.3" at top and 1.05" at bottom.
Next is 1.2" at top and .95" at bottom.
Next is 1.1" at top and .85" at bottom.
I sell other size SW dies separately if you need smaller or larger dies.
All of my SW dies are 1-1/8" tall. These dies are hardened and the inside of the die is polished very smooth.
The push rods are made out of aluminum so there is less chance you will damage your dies if you press the push rod to far down. The push rod sizes are 1-5/16" 1-1/4" 1-3/16" 1-1/8" 1-1/16" 1" 15/16" 7/8" 13/16"
Auction is for 4 dies, and 9 aluminum push rods.
Mikestilltools
NOTE: I now make these dies in a 5° inside angle that is available in another auction.
All my tools are made to order in my shop.
To see all my tools do a search for seller:mikestilltools